External Drive Gear Pump

A brushless DC motor is used to power the gear pump. It is equipped with a brushless motor driver to realize motor function control. It has speed measurement, adjustable rotation speed and forward and reverse functions. It can realize intelligent control by connecting with the host computer. It is especially suitable for workplaces with frequent starts and stops, such as precise liquid canning.

Product features:

  • Pulsation-free high precision
  • PEEK gears and bushings are resistant to organic solvents, corrosion, high temperature, and high strength and friction resistance.
  • Static seal, no leakage
  • External motor drive, low installation cost and long service life
  • Smooth gear transmission
  • The brushless motor can work continuously for about 20,000 hours and has a conventional service life of 7-10 years.
  • Safety and environmental protection levels can meet international standards (CCC, ROHS, CE)

Specification

Name Specification
motor Brushless DC motor
Rotating speed 1000-4500rpm
Rated voltage 24V
Rated current 6A
Import and export direction Both sides of the pump body
Import and export caliber G1/4 , G1/8
Temperature resistance range -40℃ ~ +100℃
Noise 60dB
Material Pump body 316L, sealing ring PTFE, gear PEEK
Insulation level Class H
Drive mode External driver
Way of working Continuous or intermittent work
Inlet filter Recommended 400 mesh
Motor wiring instructions Red: +24V Black: 0 Yellow (fine): HALL A (U) Green (fine): HALL B (V)
Blue (fine): HALL C(W)
Yellow (coarse): R(U) phase
Green (coarse): S(V) phase
Blue (coarse): T(W) phase

Product model reference table

Product number Flow(L/min) Displacement(mL/rev) Pressure(bar) Height(mm) Width(mm) Motor (W) Rated current(A) Viscosity range
WSFSGE0.3DCM57-24-80W 1.35 0.3 5 178 60 80 3.5 0.2-1500
WSFSGE0.9DCM57-24-80W 4.05 0.9 5 178 60 120 3.5 0.2-1500
WSFSGE0.9DCB66-24-120W 4.05 0.9 10 184.5 60 120 6 0.2-1500
WSFSGE0.9DCB66-24-150W 4.05 0.9 15 176 60 150 15 0.2-1500
WSFSGE1.2DCB66-24-120W 5.4 1.2 10 184.5 60 120 6 0.2-1500
WSFSGE1.5DCB66-24-150W 6.75 1.5 15 176 60 150 15 0.2-1500

Precautions

1. It is strictly prohibited to transport or clean solvents and materials containing dichloromethane, tetrahydrofuran, butyllithium, and dimethylacetamide.
2. Before disassembling the pump, please cut off the power supply to the motor and completely release the pressure in the pump.
3. Do not change the components of the pump and motor. Any changes may reduce the pressure rating of the pump and cause harm to people.
4. A sealing ring, sealant or raw material tape must be placed on the inlet and outlet joints of the pump, especially at the inlet. If there is air leakage, the liquid will not be sucked, and the noise will even increase.
5. It is prohibited to transport media containing particles, and it is prohibited to run idling/dry.