Application Summary

Application

Pattern Printing on Textiles

Description

Digital Printers are used to print patterns on banners, bulk fabric, and garments.

How It’s Used

A gear pump is used to supply ink to the print heads of the printer. The ink is continuously circulated over the inlets of the print heads to keep pigmentation particles in suspension; thus preventing blockage of the inlets.

Key Feature

Abrasion resistant pump materials

End Equipment

Digital textile printers

Pump Function

Circulation

Fluids

Pigmented inks

Flow Rate

1 to 5 L/min (16-78 US gph)

Differential Pressure

<60 psi (<4.2 bar)

PUMPING REQUIREMENTS

WSF SOLUTIONS

FLOW RATE: 1 to 5L/min (16 to 78 USG/hr)

We have variable speed pumps for this application with gear pump flows from 0.158 to 3.52 L/min (2.5 to 56 USG/hr) and centrifugal pump flows from 4 to 24 L/min (68 to 374 USG/hr).

LONG LIFE WITH ABRASIVE, PIGMENTED INKS

Our pumps were developed specifically to handle abrasive, pigmented inks. We have life test results for abrasive white inks well in excess of 20K hours.

LEAK FREE OPERATION

Our magnetic drives eliminate dynamic shaft seals, keeping fluid securely inside the pump and potential contaminants out.

SMALL PACKAGE SIZE

Our magnetic-drive gear pumps are small.

LOW POWER REQUIREMENTS

With no drag from dynamic seals in the mag-drive gear pump, power requirements are very low.

WSF Products Optimized for this Application

WSF gear pumps are most commonly used in this application. They provide reliable, smooth flow for ink circulation.